Beds & borders / Worked planning example
Plan raised-bed fill and compare bags with bulk
Use internal bed dimensions, separate material layers, and compare bag rounding with supplier bulk increments.
The amount of material a raised bed needs depends on the empty space inside it, not the external size advertised for the frame. Existing soil, intended headroom and different layers all change the volume. This guide works through one rectangular example, then compares two ways to buy the material without converting volume into an invented weight.
The example depths describe a measurement exercise. Choose suitable materials and depths for your own planting or landscaping project before calculating a purchase.
1. Measure the space you will fill
Our bed measures 2.4 m × 1.2 m internally. The inside wall is 350 mm high, but the planned fill is 300 mm deep, leaving 50 mm of headroom. Convert 300 mm to 0.300 m. Volume = 2.4 × 1.2 × 0.300 = 0.864 m³, or 864 L.
If you used the whole 350 mm wall height, you would calculate 1.008 m³. The 144 L difference is space intentionally left empty in this plan. Likewise, measuring around the outside of the frame would include the wall material in the volume. Measure inside faces, especially when a frame has thick sleepers or posts.
For a top-up, measure the gap between the existing surface and the intended finished level at several points. Use separate areas when those gaps differ substantially. Multiplying the entire bed by its full wall height would count material already present. The tool can add rectangular and circular sections; it cannot infer hidden voids or an uneven profile from a single depth.
2. Keep soil and mulch separate
Suppose the 300 mm fill consists of 250 mm of soil and a 50 mm mulch layer. Both cover 2.88 m², but they are separate products and should be separate orders:
| Material layer | Depth | Calculation | Volume |
|---|---|---|---|
| Soil | 250 mm / 0.250 m | 2.4 × 1.2 × 0.250 | 0.720 m³ / 720 L |
| Mulch | 50 mm / 0.050 m | 2.4 × 1.2 × 0.050 | 0.144 m³ / 144 L |
| Combined geometric space | 300 mm | 0.720 + 0.144 | 0.864 m³ / 864 L |
Run the soil and mulch calculator once for the soil layer and again for mulch. Selecting a material name changes the shopping-list label; it does not choose a depth, density, settlement rate or suitable growing medium. Do not enter both layers together under “soil” and assume the bag count will split itself.
The volume method also applies to several beds sharing the same material. Add each bed with its own depth, combine their volumes, and round bags once at the end. Separate suppliers or materials need separate runs. A circle takes its diameter, not its radius; entering a radius as a diameter would reduce the calculated circular area to one quarter.
3. Compare bags and bulk
For illustration only, apply 10% extra to each layer. This is an editable planning assumption, not a prediction of settlement. Soil becomes 720 × 1.10 = 792 L; mulch becomes 144 × 1.10 = 158.4 L.
| Material | Target with 10% extra | Bag volume | Bags | Purchased volume |
|---|---|---|---|---|
| Soil | 792 L | 25 L | 32 | 800 L |
| Soil, alternative bag | 792 L | 50 L | 16 | 800 L |
| Mulch | 158.4 L | 50 L | 4 | 200 L |
Notice that four mulch bags supply 200 L even though the adjusted estimate is 158.4 L. That additional 41.6 L comes from bag rounding. It is separate from the 14.4 L already included as the example’s 10% allowance. Check that distinction before adding another “spare” bag.
Bulk sellers may accept a volume such as 0.8 m³ or require larger increments. The following comparison assumes, purely for arithmetic, that the soil supplier rounds orders up to 0.1 m³. A 0.792 m³ soil target therefore becomes 0.8 m³. Ask the actual seller about increments, minimums and delivery before using this order size.
| Purchase | Material cost assumption | Delivery assumption | Total |
|---|---|---|---|
| 32 × 25 L bags | 32 × 9 = 288 | 0 (self-collection) | 288 |
| 0.8 m³ bulk | 0.8 × 120 = 96 | 75 | 171 |
These are invented prices, not current quotes. In this example bulk is 117 cheaper before any unlisted costs or value placed on collection time. To find the delivery break-even amount, subtract bulk material cost from the bag total: 288 − 96 = 192. Delivery below 192 keeps this particular bulk order cheaper; above 192 makes it dearer. Change every price and order increment to match your own quotes.
Volume does not determine vehicle load weight. Moisture and material density vary, so the calculator does not convert litres into kilograms or tonnes. Get load and delivery advice from the supplier rather than guessing from bag volume.
4. Check depth before ordering
| Measured fill depth | Geometric volume | 25 L bags after rounding |
|---|---|---|
| 200 mm | 576 L | 24 |
| 250 mm | 720 L | 29 |
| 300 mm | 864 L | 35 |
Every 10 mm over this 2.88 m² footprint changes volume by 28.8 L. Rechecking depth can therefore matter more than measuring length to another decimal place. Keep unrounded volumes until the final purchase calculation.
Iowa State University Extension explains the area-times-depth method and cubic-volume conversions. The measurements, layer comparisons and quote arithmetic here are our own examples. We do not claim the university endorses this site or the example’s chosen depths.
- Confirm internal dimensions and any material already in place.
- Choose the actual material and intended depth before adding an allowance.
- Check bag volume or bulk order units; 1 m³ equals 1,000 L.
- Record supplier minimums, increments, access and delivery charges.
- Keep soil and mulch as distinct lines on the shopping list.
Your garden material sheet
Print this page and fill in your own measurements. This sheet does not save or submit any information.
| Record | Your measurements or choice |
|---|---|
| Internal bed length / width or circle diameter | |
| Existing level and intended fill level | |
| Soil layer depth / volume | |
| Mulch layer depth / volume | |
| Chosen allowance and reason | |
| Bag volume and whole-bag count | |
| Bulk increment / minimum / quoted volume | |
| Material quote + delivery; access notes |
Plan before you buy
Worked project guides
Follow the measurements through to a practical order.
Walls & ceilings
Plan paint for two rooms without mixing up products
Separate wall and ceiling products, measure openings, and see why a small coverage change can mean another tin.
Floors & tiles
Measure an L-shaped floor and compare whole-pack costs
Work from a 16 m² room sketch to whole packs, then compare real pack prices without hiding rounding.
Beds & borders
Plan raised-bed fill and compare bags with bulk
Use internal bed dimensions, separate material layers, and compare bag rounding with supplier bulk increments.