01Measure the walls
For a rectangular room, wall area is 2 × (length + width) × height. Subtract the combined area of windows and doors you will not paint. Select walls only, ceiling only, or both. Combine walls and ceilings only when they use the same paint.
02Read your paint label
Divide paintable area by coverage per litre, then multiply by the number of coats. Coverage varies by product and surface: enter the value printed on your chosen tin.
03Allow a little extra
The adjustable allowance adds to calculated paint volume before we round up to whole tins. The example uses 10%; this is a starting assumption, not a manufacturer recommendation.
How much paint for a room?
Examples use 2.4 m wall height, no deducted openings, no ceiling, two coats, 10 m²/L coverage and 10% extra. Tins are rounded up after combining the paint quantity.
These are examples, not product specifications. Enter your own measurements and product details in the calculator above.
Common questions
How is the paint estimate calculated?
The formula is paintable area × number of coats ÷ coverage, then multiplied by 1 + the extra percentage ÷ 100. For example, 30 m² with two coats and 10 m²/L coverage needs 6 L before allowance, or 6.6 L with 10% extra. With 5 L tins, that means two tins.
Can I combine rooms with different colours?
Only combine rooms that use the same paint and coverage. Make a separate estimate for each colour or product. Otherwise, pooling quantities could leave you short of one colour even when the overall volume is sufficient.
What about primer, trim and irregular rooms?
Primer and trim are not included automatically. This calculator models rectangular rooms; split a complex room into sensible areas or make separate estimates. Avoid counting shared dividing edges as extra walls. Check the product instructions for primer and preparation requirements.
Does imperial mean US or UK gallons?
Paint volumes use US liquid gallons: 1 US gallon is 3.785411784 litres. Imperial-length inputs are feet. A UK imperial gallon is different and should not be entered as a US gallon.
Where do the calculation methods come from?
The area, coverage and coats approach follows Dulux’s published paint-calculation method. This is an independent tool, not affiliated with Dulux. Product-specific coverage always takes priority.