Walls & ceilings / Worked planning example
Plan paint for two rooms without mixing up products
Separate wall and ceiling products, measure openings, and see why a small coverage change can mean another tin.
You can have enough paint in total and still run out of the colour you need. The useful starting point is a list of surfaces that use exactly the same product, finish and colour. Only those surfaces belong in the same estimate. Here we plan two rectangular rooms, keep the ceilings separate, and follow the quantity all the way to whole tins.
This is a worked planning example. The coverage, coats, allowance and tin sizes are chosen to explain the arithmetic; they are not a specification for your paint.
1. Make a measurement record
Sketch each room from above. Write down its internal length, width and painted wall height in metres. Measure the painted height rather than assuming it equals a ceiling specification. Record doors and windows by width × height, then add only the openings you will exclude from the wall paint.
| Surface group | Length × width | Height | Excluded openings |
|---|---|---|---|
| Living room walls | 4 × 3 m | 2.4 m | Door 0.9 × 2.1 m; window 1.2 × 1.2 m |
| Bedroom walls | 3 × 3 m | 2.4 m | Door 0.9 × 2.1 m; window 1 × 1.2 m |
| Ceilings, separate product | 12 + 9 = 21 m² | — | None in this example |
The living-room openings total 1.89 + 1.44 = 3.33 m². The bedroom openings total 1.89 + 1.20 = 3.09 m². We exclude those faces from the walls, but that does not estimate paint for the doors, frames or window reveals. Put those on a separate trim list if they will be painted.
A large permanent opening into another room is also an opening. A chimney breast, sloped ceiling or wall recess needs its own measured surface calculation; treating it as a simple rectangular room can miss area or count it twice.
2. Calculate each product
For a rectangular room, wall area = 2 × (length + width) × height − excluded openings. Living-room walls are 33.60 − 3.33 = 30.27 m². Bedroom walls are 28.80 − 3.09 = 25.71 m². If both use the same wall paint, combine them: 55.98 m².
Our wall-paint example uses two coats, coverage of 10 m²/L per coat, and 10% extra. Required litres = 55.98 × 2 ÷ 10 × 1.10 = 12.3156 L. At 5 L per tin, round 12.3156 ÷ 5 up to three tins, or 15 L purchased. The 2.6844 L difference is arithmetic headroom, not a promise of usable leftover paint after application.
| Product assumption | Area | After coats and allowance | Whole containers |
|---|---|---|---|
| Wall paint: 10 m²/L, 2 coats, 10% extra | 55.98 m² | 12.3156 L | 3 × 5 L = 15 L |
| Ceiling paint: 12 m²/L, 2 coats, 10% extra | 21 m² | 3.85 L | 1 × 4 L = 4 L |
In the paint calculator, enter the two rooms with “Walls only” selected for the wall estimate. For the separate ceiling estimate, keep the same room footprints and choose Ceiling only in each room’s “Surfaces to paint” menu. Wall height and openings are then excluded, leaving 12 + 9 = 21 m². Set coverage to 12 m²/L, two coats, 10% extra and a 4 L tin to reproduce the ceiling order above.
The room breakdown lists wall and ceiling areas separately so you can check which surfaces you included. Use “Walls and ceiling” only when both use the same product, finish and colour. Primer, sealer and trim coats are separate quantities and are not added automatically.
3. Check coverage and tin sizes
Use coverage from the chosen product’s label or data sheet. “Up to” coverage may not be achieved on your surface. The same room measurements give different shopping lists when the assumed coverage changes:
| Coverage per coat | Calculated litres | Tins to buy | Purchased volume |
|---|---|---|---|
| 8 m²/L | 15.3945 L | 4 | 20 L |
| 10 m²/L | 12.3156 L | 3 | 15 L |
| 12 m²/L | 10.263 L | 3 | 15 L |
Rounding is a separate decision from allowance. An extra percentage adjusts the estimated application volume; whole-tin rounding adjusts the purchase. Buying the same 10 m²/L wall product in 4 L tins would require four tins (16 L), whereas 5 L tins require three (15 L). Compare the actual shop prices and availability rather than assuming the larger number of tins is cheaper or dearer.
If the rooms use different wall colours, run them separately: 6.6594 L for the living room and 5.6562 L for the bedroom at the central assumptions. Each requires two 5 L tins. That is four tins across two colours, rather than the three tins possible when all the wall paint is interchangeable.
4. Turn the estimate into an order
- Confirm the exact colour, finish, coverage per coat and container volume for each product.
- Check preparation and coat requirements against the product instructions; do not treat the example’s two coats as universal.
- Keep a separate line for primer, ceiling paint and trim. Record what your estimate excludes.
- Recheck any dimension that puts the order near a whole-tin boundary. Changing a small opening may not change the tin count; changing actual coverage can.
- Keep the product details with your printed list so an in-store substitution does not silently change the calculation.
For the general area, coats and coverage approach, see Dulux’s paint calculator. All rooms, comparisons and quantities on this page are our own worked examples. Dulux does not endorse this site.
Your paint planning sheet
Print this page and fill in your own measurements. This sheet does not save or submit any information.
| Record | Your measurements or choice |
|---|---|
| Room / colour / finish | |
| Internal length × width × painted height | |
| Each excluded opening: width × height | |
| Net wall area; separate ceiling area | |
| Label coverage per coat; coat count | |
| Extra allowance and why you chose it | |
| Tin size / number / total volume | |
| Separate primer and trim quantities |
Plan before you buy
Worked project guides
Follow the measurements through to a practical order.
Walls & ceilings
Plan paint for two rooms without mixing up products
Separate wall and ceiling products, measure openings, and see why a small coverage change can mean another tin.
Floors & tiles
Measure an L-shaped floor and compare whole-pack costs
Work from a 16 m² room sketch to whole packs, then compare real pack prices without hiding rounding.
Beds & borders
Plan raised-bed fill and compare bags with bulk
Use internal bed dimensions, separate material layers, and compare bag rounding with supplier bulk increments.